Network Security Diagram Examples for Secure Network Design

Written By Amanda Athuraliya • Updated on: November 3, 2026 • 8 min read
Sharesocial-toggle
social-share-facebook
social-share-linkedin
social-share-twitter
Link Copied!
Network Security Diagram Examples for Secure Network Design

Network security protects the systems and data connected to a network by controlling access, separating sensitive areas, and watching for suspicious activity. A diagram makes that design easier to discuss: it shows where traffic travels, which boundaries it crosses, and where controls are planned. This guide explains the basics through editable network security diagram examples.

What Is a Network Security Diagram

Network security diagrams are visual maps of a network’s security setup. They show how key security components work together, including:

  • Firewalls and gateways

  • DMZ and trust zones

  • IDS/IPS and monitoring tools

  • Network segmentation

  • Traffic and data flows

Instead of reading long documentation, teams can see how security is structured at a glance.

Network Security Basics: What to Look for in a Diagram

Start with the assets the network needs to protect: devices, applications, services, and the data they handle. Then trace who or what can reach them. A useful security diagram makes the following visible:

  • Traffic paths: Show how users, devices, and services connect, including internet and remote-access routes. Label important flows so a reviewer can tell what communication is expected.

  • Trust boundaries and segmentation: Group systems by access needs, such as public services, employee devices, and sensitive internal systems. A DMZ or separate VLAN can make a boundary visible; the policies between zones determine what traffic is actually allowed. The office segmentation and VLAN examples below show two ways to map this.

  • Access controls: Mark where firewalls or gateways filter traffic and where users or devices must be authenticated. The internet firewall example shows a perimeter control, while the distributed firewall example shows controls between internal segments. See the firewall network diagram guide for more layouts.

  • Monitoring points: Identify where logs or intrusion detection and prevention tools observe traffic. This helps a team discuss how it would notice an unexpected connection, not just how it plans to block one.

These are parts of a security design, not a security test. A diagram can expose a missing or unclear boundary for review, but it cannot confirm that a firewall rule is configured correctly or that an environment meets an audit requirement.

How to Use These Network Security Diagram Examples

  1. Choose the right starting view. Use the basic example for a small network, the office zone or VLAN examples for segmentation, and the Amazon VPC example for cloud connections. Keep only the components that exist in your environment.
  2. Mark assets and allowed flows. Add users, devices, applications, data stores, and the connections they need. Label the direction and purpose of important flows rather than drawing an unexplained line between every device.
  3. Add boundaries and controls. Show which systems are public or internal, where traffic crosses zones, and which firewall, gateway, or access policy is intended to govern each crossing.
  4. Review and maintain the map. Ask network and security owners to compare it with current configurations, note unknowns, and update it when systems or access rules change. For general diagram layout and symbols, use the step-by-step network diagram guide.

To try the workflow, open the basic network security diagram template and replace its sample devices and connections with your own.

Network Security Diagram Examples to Visualize Firewalls, Segmentation, and Access Control

1. Basic Network Security Diagram Example

Shows a standard network layout with firewalls, DMZ, and security controls. Helps teams visualize traffic flows and identify potential vulnerabilities in a simple, easy-to-understand structure.

Network security diagram example showing firewalls, routers, and protected network segments for secure data flow
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Network Security Diagram Example

2. Zone Segmentation in an Office Network (Local Network Security)

Illustrates how an office network can be divided into separate security zones. Enables better policy enforcement, reduces risks, and clearly separates trusted and untrusted areas.

Diagram of zone segmentation in an office network showing how local network areas are divided and secured for better security management
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Zone Segmentation In A Office Network (Local Network Security)

3. Reference Architecture with Amazon VPC Configuration

Provides a blueprint for securing cloud infrastructure on AWS. Includes VPC design, subnets, gateways, and security groups for a scalable, well-protected cloud network.

Diagram of a reference architecture showing an Amazon VPC configuration with subnets, gateways, and connected resources
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Reference Architecture with Amazon VPC Configuration

4. Government Cloud Mesh Network

Visualizes a government or enterprise cloud network with a mesh architecture. Use it to discuss connections between cloud nodes, access boundaries, and where controls need to be documented.

Diagram of a government cloud mesh network showing interconnected cloud nodes and secure data flow between government agencies
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Government Cloud Mesh Network

5. Babylon Network

A detailed enterprise network security architecture diagram showing multiple subnets, firewalls, and monitoring points. Ideal for modeling complex organizational networks and planning security controls.

Babylon enterprise network diagram showing subnets, firewalls, and monitoring points
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Babylon Network

6. Internet Firewall Deployment

Focuses on firewall placement at network boundaries. Use it to review which traffic should reach internal resources and where firewall rules need to be checked.

Diagram of an internet firewall deployment showing a firewall protecting the internal network from external traffic
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Internet Firewall Deployment

7. Public Hotspot Star Topology Network Diagram

Shows a star topology for a public Wi-Fi hotspot. Highlights centralized control, traffic routing, and security considerations for open networks.

Diagram of a public hotspot star topology network showing multiple user devices connected to a central access point
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Public Hotspot Star Topology Network Diagram

8. Office Network on Single Subnet

Illustrates a small office network using a single subnet. Useful for visualizing internal device connectivity and implementing basic security controls.

Diagram of an office network on a single subnet showing connected devices sharing the same IP network
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Office Network on Single Subnet

9. VLAN Network Diagram

Demonstrates the use of VLANs to segment a network logically. Helps administrators separate traffic types, enforce access policies, and improve overall network security.

Diagram of a VLAN network showing segmented virtual local area networks configured within a shared physical network
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
VLAN Network Diagram

10. Distributed Firewall Topology Network Diagram

Provides a visual of a distributed firewall setup across multiple network segments. Designed to enhance security, control traffic flows, and isolate potential threats.

Diagram of a distributed firewall topology showing multiple firewalls deployed across different network segments for enhanced security
Edit this Template
  • Ready to use
  • Fully customizable template
  • Get Started in seconds
exit full-screen Close
Distributed Firewall Topology Network Diagram

More Network Diagram Templates

Why Use Creately to Draw Your Network Security Diagrams

When it comes to creating network security diagrams, the tool you choose matters. Creately’s network diagram software stands out because it combines powerful diagramming capabilities with ease of use and collaboration features, making network security planning faster and clearer for teams of all sizes.

Easy, Intuitive Diagram Creation

Creately offers a drag-and-drop interface that makes placing devices, security controls, and connections effortless. You don’t need steep training — network engineers and security teams can focus on design, not wrestling with the tool. Its extensive library of industry-standard shapes (routers, firewalls, cloud icons, VLAN symbols, and more) helps you build an accurate network security model diagram quickly.

Ready-to-Use Templates and Shape Libraries

With Creately, you gain access to a large set of pre-built network diagram templates, allowing you to start from professionally designed examples instead of a blank canvas. You can customize templates to match your environment, whether documenting a basic office setup or an advanced cloud architecture.

Collaboration Built for Teams

Network security diagrams are rarely created solo — they’re shared artifacts used by architects, admins, auditors, and stakeholders. Creately supports real-time collaboration, so multiple people can edit the same diagram simultaneously, leave comments, and provide feedback. All changes are tracked with version history, making it easy to review or revert previous iterations.

Rich Detail and Documentation Support

Beyond simple diagrams, Creately lets you attach notes, data, IP addresses, and specifications to individual components, ensuring every diagram contains meaningful context. You can export diagrams as PDF, SVG, or PNG for reporting or presentations.

Integrates Seamlessly Into Your Workflow

Creately works with tools teams already use, like Slack, Google Drive, and Confluence, making it easy to embed diagrams into reports, tickets, or knowledge bases.

‌‌

FAQs About Diagrams of Network Security

Why are network security diagrams important?

Network security diagrams help teams:

  • Clearly communicate network structure and security design

  • Identify gaps, weak points, and risky access paths

  • Plan and review security controls before issues occur

  • Support threat modeling, audits, and incident response

They are widely used in modern IT and cybersecurity planning because visuals reduce confusion in complex environments.

Who uses network security diagrams?

These diagrams are used across technical and compliance teams:

  • Network and system administrators

  • Security architects and engineers

  • Auditors and compliance teams

  • IT and security leadership

They create a shared understanding of security architecture across everyone involved.

What is a network security diagram used for?

A network security diagram shows assets, traffic paths, trust boundaries, and planned controls such as firewalls, access rules, and monitoring. Teams use it to review a design and discuss potential gaps; the diagram alone does not verify that controls work.

What types of network security diagrams can I create with Creately?

You can create diagrams for office networks, VLAN setups, cloud VPCs, firewall deployments, DMZ layouts, and zero-trust architectures, among others.

Can I use Creately diagrams for compliance and audits?

Diagrams can document where controls are intended to operate and help auditors understand the network. They should be supported by current configurations, policies, and other evidence; a diagram alone does not demonstrate compliance.

Is Creately suitable for both beginners and advanced IT teams?

Yes. Beginners benefit from ready-made templates and intuitive tools, while advanced teams can design complex, multi-layered network architectures with precision.

Can I use Creately to model cloud network security?

Definitely. Creately supports AWS, Azure, and GCP architectures, allowing you to map VPCs, subnets, security groups, and cloud-specific controls visually.

Can I update diagrams as my network evolves?

Yes. Creately lets you edit diagrams in real time, update components, and maintain version history to reflect network changes accurately.

Can I create diagrams for both physical and logical networks?

Absolutely. Creately supports physical layouts (hardware, switches, routers) and logical diagrams (VLANs, subnets, security zones).

Amanda Athuraliya
Amanda Athuraliya Content Editor at Creately
Amanda Athuraliya is a Content Strategist and Editor at Creately, a visual collaboration and diagramming platform used by teams worldwide. With over 10 years of experience in SaaS content strategy, she creates and refines research-driven content focused on business analysis, HR strategy, process improvement, and visual productivity. Her work helps teams simplify complexity and make clearer, faster decisions.
linkedin icon
View all posts by Amanda Athuraliya →
Leave a Comment